SPANJAARD Copper Compound
Click image to view full sizeItem-Name:
SPANJAARD Copper Compound
SPANJAARD Copper Compound
More-Details:
SPANJAARD Copper Compound
Spanjaard Brand
Product Description
SPANJAARD Copper Compound
Spanjaard Brand
Conforms to US MILITARY SPECIFICATION – MIL-A-907E
Product Description
Spanjaard Copper Compound
Use SPANJAARD Chrome Compound or SPANJAARD Nickel Compound.
anti-seize & assembly compounds, anti-seize & assembly compounds, anti-seize & assembly compounds
Permits firmer tightening and easier loosening of threaded connections and mating surfaces.
Anti-seize, anti-corrosion compound – extreme temperature up to 1 100°C.
Resistant to acid, alkali, steam, water and sea water corrosion.
Application
Use on automotive wheel studs, exhaust system nuts, cylinder head bolts, brake expanders,
adjusters and any nut and bolt you may later want to remove.
Application
Use on the back of disc pads to prevent brake squeal.
Not suitable for use on austenitic / stainless steels.
Applicable industry
AUTOMOTIVE, INDUSTRIAL MINING, MARINE
More Products
SPANJAARD AIR DRYING FILM SPRAY
Spanjaard Air Drying FILM Spray Spanjaard Brand Color : dark gray / black Container size : 325ml Product Description ADF AIR DRYING FILMAvailable in aerosol and bulk packs Leaves a completely dry, hard film which oven cures at 250°C in 60 minutes or at ambient temperatures in 24 hours. For dry lubrication in dusty conditions Also used as a protective coating resistant to nearly all alkali and acids (including concentrated Nitric acid) Applications • Ultra-fine molybdenum disulfide particles (MoS2-0.4um) • Dry resin lubricating protective layer • High load、high pressure • It can prevent acid, alkali and rust Instructions • Shake well before use, • Spray one or more layers as needed• Dries out within 1H at 250 degrees Celsius.• Air dry within 24H at room temperature Physical characteristics • Color: dark gray/black• Operating temperature: -20°C to 350°C• Packaging: 325 ml spray Scope of application It can be used for pre-assembly before assembly/protective coating/high temperature environment lubrication/dry lubricant/cutting tools/folding molds/stamping dies. Applicable industries textile machinery, military industry, steelmaking, automobile assembly, aerospace, wind power equipment, power plants
FN-2813 Exclusive Anti-Spatter Agent For Nozzles
FN-2813 Exclusive Anti-Spatter Agent For Nozzles Model: FN-2813 Capacity: 250 ml Welding does not stick to your hands Welding does not drip hands Not sticking to fire Super convenient for scum removal Instructions for use Three bottles can be used daily for about five months, about 450 times. Wipe the burner clean and repeat the wet and dry procedure twice to achieve the best anti-slag effect The anti-slag effect is about 8 hours, 350A-lasts about 4 hours. Please note that the maximum withstand current is 350A If it gets into the eyes or sticks to the skin, rinse with water and do not swallow Applicable materials Plasma Outer Flare, CO2 Flare, Tip
FN-1101 Anti-weld spatter agent
FN-1101 Anti-weld spatter agent Available in a large economy container size of 18 liters. pressurized cans (420 ml each) spray bottles (500 ml each) Product Description You will realize the amazing effect from the moment you use it. This is an innovative and exclusive anti-weld spatter agent. This product can be used for mild steel, stainless steel, and bonded steel sheets. Applicable materials Can use white iron (stainless steel version), black iron (low carbon steel), curb board (galvanized steel), hot and cold steel can be used. Instructions for use 1. Move the FN-1101 agent from the container to the sprayer. 2.Adjust the nozzle of the sprayer so that the agent is sprayed in a form of a mist. 3.Spray a small amount of the FN-1101 anti-spatter agent in the sprayer on the area that will be welded. ( Pay attention not to spray too much of the FN-1101 agent.) The data shown above is based on actual results during use. Precautions for use : 1. In the case of high-current welding, use the current value of about 350 A as a guide. 2. If the agent gets in your eyes, flush the eyes thoroughly with water. 3. If the agent gets on your hands, wash the hands thoroughly with soapy water. 4. The net contents of a pressurized can show the amounts of both the agent and gas.
Gas detector (eZsense)
BT-600 remote control
BT-600 remote control Product Description European safety regulations onvenient Copy protection Strong external function Brand service guarantee Good remote control distance - 300M Product structure description • Dedicated models for homestays and farms • Lightweight wireless handset slide type • Good remote control distance - 300M • 110V/220V automatic conversion • The only copy-proof dialing machine in Taiwan
Spanjaard Cold Zinc Galvanizing Spray
Spanjaard Cold Zinc Galvanizing Spray Spanjaard Brand Color: silver Container Size : 400ml Product Description Spanjaard Cold Zinc Galvanizing Spray 400ml -Zinc rich touch-up paint for galvanised steel. Use after galvanising as a touch-up paint for damaged galvanised surfaces or as a primer or final coat to iron or steel. Applications • Hard not to fall off• The protective layer• Anti-corrosion• Anti-oxidation Instructions • After shaking the spray• Please stay away from the object to be sprayed• Spray before 20cm Physical characteristics • Color : silver• Thickness of galvanized layer : 100um can be sprayed more than 4 times• Packing: 400 ml spray /1 box of 12 cans Applicable range Apply to galvanised steel that has been cut, drilled or welded thereby replacing the galvanised coating that was removed as a result of the drilling, cutting or welding. Forms a flexible, non-cracking, non-chipping coat. Applicable industry Agricultural machinery, air-conditioning parts, ship equipment, mining machinery, power plants, power transmission towers, rapid transportation facilities, offshore platforms, roof nail heads, automobiles, gold-plated galvanized long-term anti-corrosion, welding to form a protective layer to prevent rust.
electrolyte
electrolyte electrolyte cloth (blue bag type) 4mm*3cm*3.5cm
Long hair brush for welding bead processing machine-95mm
